All research equipment, financed by public funds, is when not used available (for free) for external users for free. Please, fill the form bellow and check the availability.
Both devices (an X-ray diffractometer and a fluorescence lifetime
spectrometer) have been installed at the Ajdovščina Campus of the
University of Nova Gorica. At the same time, the development of
measuring systems for measuring the electrical conductivity of materials
in a wide temperature range is in progress.
Both of the two main research equipment installations are widely used
for characterizing nanostructured and traditional materials. Neither of
these pieces of equipment was available before the establishment of the
Real-time oscilloscope with 13 GHz input bandwidth, 4 channels, 40GS/s
sampling.Reference page: http://www.home.agilent.com/en/pd-1308212-pn-DSA91304A/infiniium-high-performance-oscilloscope?nid=-34748.749311&cc=SI&lc=eng
Assistance needed: YES
Fusion fiber splicer for splicing standard and special polarization-maintaining
optical fibers (PANDA, TIGER, BOW-TIE,...). Splicer automaticaly aligns both
fiber ends in X, Y, Z and Theta axis. Fiber cladding diameters can vary from 80
um to 400 um.
Reference webpage: http://www.fujikura.com.sg/FSM-45PM.htm
The AKTA is a liquid chromatography system designed for fast and reliable separations of proteins, peptides and nucleic acid. It is ideally suited for applications which require up to 10 ml of flow rate per minute and where a filter based wavelength detector is adequate.
Reference page: http://www.gelifesciences.com/webapp/wcs/stores/servlet/catalog/sl/GELifeSciences-si/products/AlternativeProductStructure_17162/28406266
Further readings: http://gmi-inc.com/GE-Pharmacia-AKTA-Purifier.html
Responsible person assistance needed: YES
Synergy™ H1 is a multidetection reader microtiter plates and can be used for measuring absorbance, fluorescence and luminiscence. It allowes incubation at 45 °C and shaking. Take 3 plates allowes measuring absorbance 2µl for 16 samples and for measuring absorbance in cuvettes.
Reference page: http://www.biotek.com/products/microplate_detection/synergyh1_hybrid_multimode_microplate_reader.html
Further readings: http://www.biotek.com/resources/docs/E_coli_app_note_final_format-2.pdf
Mass spectrometer system is development for enableing high-precise mass analysis. LCMS-IT TOF delivers high mass accuracy and high mass resolution (10,000 at 1000 m/z).
Reference page: http://www.ssi.shimadzu.com/products/product.cfm?product=lcms_it_tof
Further readings: http://www.shimadzu.com/an/lcms/lcmsittof/metabo-example.html
The Infinite M200 PRO
offers monochromator based detection technology. Fluorescence and absorbance
can be measured on 6 to 384 well plates formats.
Reference webpage: http://www.tecan.com/platform/apps/product/index.asp?MenuID=2043&ID=3161&Menu=1&Item=188.8.131.52.5
Additional literature: http://www.tecan.com/platform/apps/product/index.asp?MenuID=1816&ID=1922&Menu=1&Item=184.108.40.206.4
Spektrofluorimeter Infinite F200 PRO uporablja filterski postopek
detekcije za merjenje fluorescence in polarizacije. Podpira
mikrotiterske ploščice formata 6 do 384 lukenj.
Stran proizvajalca: http://www.tecan.com/platform/apps/product/index.asp?MenuID=2043&ID=3161&Menu=1&Item=220.127.116.11.5
Dodatna literatura: http://www.tecan.com/platform/apps/product/index.asp?MenuID=1816&ID=1922&Menu=1&Item=18.104.22.168.4
Potrebna pomoč strokovnjaka: DA
MTS-8000 main frame with OTDR and CD measurement modules is used for
precise single-mode fiber-length measurements (up to 50 km) and chromatic
Reference webpage: http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/mts-8000.aspx
MicroTCA Starter Kit takes you on the fastest path to MicroTCA evaluation and application development. When you receive your MicroTCA Starter Kit, you'll experience a straightforward out-of-the-box installation allowing you to get up and running in no time. The system comes pre-integrated with the blades described below and a bootable Linux is loaded on to the hard disk drive. The package comes with a simple startup guide for trouble-free bring-up, test and verification. You'll soon see that the Advantech MicroTCA Starter Kit makes MicroTCA development uncomplicated and fast to deploy.
39 ET family of chassis showcases an optimal design that addresses
EMC and cooling in a highly attractive and cost effective package. 2, 4,
6, 8 and 10 slot VME64x backplanes in various configurations can be
mounted. 200W to 750W power supplies are standard.
Reference page: http://www.elma.com/Germany/English/Products/SystemPlatforms_3/VME64x_24/949/8448.aspx
Further readings: http://www.elma.com/Admin/ProductionFiles//ProductFile/8448/English/data_sheet%20type_39_et_3u.pdf
The Emerson Network Power MVME3100 SBC helps OEMs of industrial,
medical, and defense/aerospace VMEbus platforms add performance and
features for competitive advantage while still protecting the
fundamental investment in VMEbus and related technologies. Customers can
keep their VMEbus infrastructure (chassis, backplanes, and other VMEbus
and PMC boards) while improving performance and extending the
lifecycle. Also, the extended lifecycle of Emerson computing products
helps reduce churns in development and support efforts resulting from
frequent product changes.
Reference page: http://www.emersonnetworkpower.com/en-US/Products/EmbeddedComputing/VMEbus/Pages/EmbCompMVME3100.aspx
Further readings: http://www.emersonnetworkpower.com/en-US/Products/EmbeddedComputing/Documents/DocumentationArchive/BrochuresDataSheets/01/mvme3100-ds.pdf
Fan-out modules distribute the timing signal generated by an Event
Generator to an array of Event Receivers. The Fan-Out Concentrator
module provides both a fan-out and a concentrated backwards channel from
the EVRs towards an EVG. Two-way communication was introduced with the
Modular Register Mapping which is currently available for the
CompactPCI/PXI and PMC form factor modules.
The Fan-Out Concentrator operates as a one in - eight out fan-out and
eight in - one out concentrator. Events, distributed bus bits and data
buffers are concentrated and sent further towards the EVG.
Reference page: http://www.mrf.fi/index.php/compactpci-products/82-compactpci-fan-out-concentrator-cpci-fct-8
Further readings: http://www.mrf.fi/index.php/compactpci-products
System for horizontal boards
Front: 6 U, 160 mm deep
Rear I/O: 6 U, 80 mm deep
4 slot, 6 U, 64 bit
System slot on the left
ATX power supply, 250 W
Heat dissipation by hot-swap fan unit (from left towards right).
Further readings: /
The Spartan®-6 FPGA SP605 Evaluation Kit delivers all the basic
components of hardware, design tools, IP, and reference designs enabling
development right out of the box. This kit provides a flexible
environment for system design and provides pre-verified reference design
and examples on how to leverage features such as high-speed serial
transceivers, PCI Express®, DVI, and/or DDR3. This kit includes an
industry-standard FMC (FPGA Mezzanine Card) connector for future scaling
and customization to specific applications and markets.
Reference page: http://www.xilinx.com/products/boards-and-kits/EK-S6-SP605-G.htm
The National Instruments PXI-1042 Series chassis are designed to meet
the needs of a wide range of test and measurement applications. The NI
PXI-1042 Series includes the PXI-1042 (extended 0 to 55 °C temperature
range) and the PXI-1042Q (acoustic emissions as low as 43 dBA). The
PXI-1042 Series chassis incorporate all features of the latest PXI
specification, including built-in 10 MHz reference clock, PXI trigger
bus, star trigger, and local bus. RT Series PXI embedded controllers
deliver a flexible, rugged platform for your deterministic, real-time
measurement and control applications. The NI PXI-8110 RT controller with
its 2.26 GHz quad-core processor; 2 GB, 800 MHz DDR2 standard memory;
and high-performance, 7200 rpm hard drive offers a high-performance
platform ideal for demanding real-time test and control applications.
You develop your LabVIEW application with the LabVIEW Real-Time Module
on Windows and download the program to your PXI-8110 RT controller via
Ethernet. The embedded code executes on a real-time OS. Thus, you use
the powerful and flexible development tools of LabVIEW to build
reliable, real-time solutions. NI FlexRIO hardware provides flexible,
customizable I/O for NI LabVIEW FPGA. It features two parts: NI FlexRIO
field-programmable gate array (FPGA) modules for PXI and NI FlexRIO
adapter modules. Together, they form a high-performance, reconfigurable
instrument programmable with LabVIEW FPGA software. The PXI-7954R NI
FlexRIO FPGA module features a Virtex-5 LX110 FPGA and 128 MB of onboard
DDR2 DRAM. The new Virtex-5 FPGA architecture is optimized to execute
faster and more efficiently using single-cycle timed loops in LabVIEW
FPGA. This means you can optimize more LabVIEW FPGA code to fit within
Virtex-5 FPGAs and can execute more operations per clock cycle.
Reference page: http://sine.ni.com/nips/cds/view/p/lang/sl/nid/13909
The cPCIS-2500 series 3U CompactPCI 6-slot Cubic Chassis is designed
for 3U CompactPCI cards and modules without rear I/O. It is 4U in
height, 237 mm deep, and suitable for bench top use or wall mounting. It
is ideal for industrial or transport applications where small chassis
size and versatility are important. A built in cooling system with
removable filter provides maximum cooling efficiency, and the 250W cPCI
power supply allows easy maintenance. The cPCIS-2500 series' ability to
handle a wide range of temperatures and excellent shock and vibration
characteristics make it suitable for operating in a rigorous
environment. The cPCI-3965 Series is a 3U CompactPCI single board
computer in single slot (4HP) or dual slot (8HP) width form factor
featuring the Mobile Intel® GME965 Express chipset and low power CoreTM2
Duo or Celeron® processor(s) with 800MHz front-side bus (FSB). The
cPCI-3965 provides two SO-DIMM sockets for up to 4GB of non-ECC memory,
VGA + DVI dual display, true IDE CompactFlash slot, and 2.5¡¨ SATA HDD
(8HP cPCI-3965D). Front panel I/O includes 2x USB, 2x GbE, VGA, and
additional 2x USB, COM, KB/MS, and DVI for the 8HP cPCI-3965D model. The
optional Rear Transition Module (RTM) provides 2x SATA, 1x GbE, 2x USB,
and 1x COM. Two lanes PCI-Express x1 are routed to J2 and to the layer 2
board-to-board connector to allow custom I/O expansion, such as
additional LAN port, or graphics functions. The cPCI-3965 Series is
ideally suited for factory auto- mation, and other industrial
Reference page: http://www.adlinktech.com/PD/web/PD_detail.php?pid=177
Further readings: http://www.adlinktech.com/PD/web/PD_detail.php?cKind=&pid=804&seq=&id=&sid=
DG5102 is a multipurpose generator combining different
capabilities including Function Generation, Arbitrary Waveform
Generation, IQ Baseband Source/IQ IF Source, Frequency Hopping Source
(optional) and Pattern Generation (optional). With single and true,
independent, dual-channel models that provide adjustable phases between
the two channels. The DG5102 adopts Direct Digital Synthesizer (DDS)
technology, which providing stable, precise, low distortion signals. The
user-friendly interface design and panel layout improves efficiency or
utilize an interface for complete programmability.
Reference page: http://www.rigolna.com/products/waveform-generators/dg5000/dg5102/
Allows a number of chemical experiments, such as impedance measurements, potentiostatic and potentiodynamic measurements and electrochemical noise measurements as part of amperometric techniques or cyclic voltammetry.
Reference page: http://www.digi-ivy.com/dy2100.php
Further readings: http://www.digi-ivy.com/dy2100.php
Photoluminescent spectrophotometer is used to analyze the electronic properties of materials. In our laboratory, the device will be used mainly for the analysis of carbon nanoparticles as an essential parts of nanostructured materials.
Reference page: http://www.edinburghphotonics.com/spectrometers/fls920-fluorescence-spectrometers/
Further readings: http://www.edinburghphotonics.com/spectrometers/fls920-fluorescence-spectrometers/
X-ray diffraction (XRD) of new generation enables faster signal acquisition with automatic feed by 15 consecutive samples with different presetup programs. This non-destructive method of analysis gives basic information on the phase composition, voltage, size and crystallographic structure of particles all kinds of shapes and materials.
Reference page: http://www.panalytical.com/index.cfm?pid=1343
Further readings: http://www.panalytical.com/index.cfm?pid=1342
Graphical Processing Unit, 4 GPUs, dual PCIe x16 connection to the host PC, Linux support, 4GFLOPS/s
Reference page: http://www.nvidia.com/object/personal-supercomputing.html
Center odličnosti za biosenzoriko,
instrumentacijo in procesno kontrolo
email: firstname.lastname@example.org, email@example.com
tel: 00386 5 85 00893